HIGHLIGHTS
The CSS Sentryum by Riello UPS is designed in
compliance with standard EN 50171 and is therefore the ideal solution for
installation in buildings subject to fire safety regulations and in particular for
the power supply of emergency lighting systems.
This is not all however, according to local regulations the CSS Sentryum range
by Riello UPS is also suitable for supplying power to other emergency systems such
as automatic fire extinguishing systems, alarm systems and emergency detection
systems, smoke extraction equipment and carbon monoxide detection devices as well as
dedicated security systems in sensitive areas. The use of centralised supply systems
(CSS) ensures a significant reduction in system set-up and maintenance costs as well
as making periodical checks simpler and faster to perform.
DUAL INPUT
The Riello UPS CSS Sentryum range is equipped with DUAL INPUT as
standard on all models. This important feature allows the mandatory scheduled
checks on system operation and autonomy to be carried out with extreme ease
and in complete safety by simply operating an input switch. This switch interrupts
the power supply to the machine without interrupting the bypass line,
which is able to support the load in the event of test failure.
HIGH RECHARGE CURRENT AND BATTERY CARE SYSTEM
Proper battery care is critical to ensuring correct CSS operation in
emergency conditions. The Riello UPS battery care system consists of
a series of features and capabilities designed to obtain the best
performance, extend operating life and satisfy the recharge times
imposed by the standard. The Riello UPS CSS Sentryum range is
designed in compliance with standard EN 50171 and ensures high
current levels are available for the batteries, allowing recharge of up
to 80% of full autonomy within 12 hours. Riello UPS CSS Sentryum are
suitable for use with hermetically sealed lead-acid (VRLA), AGM and
GEL batteries and Open Vent and Nickel batteries. Different charging methods
are available depending on the battery type. The recharge voltage
compensation function based on temperature prevents excessive battery
charges and overheating. The deep discharge protection prevents reduced
battery performance and battery damage.
HIGH OVERLOAD CAPACITY
As required by standard EN 50171, the Riello UPS CSS Sentryum range is
designed and sized to support continuous overloads (with no time limits)
of up to 120% of nominal load.
PROTECTION AGAINST BATTERY INVERSION
Mandatory in line with standard EN 50171, protection against battery
inversion ensures the safety of those carrying out maintenance operations
on the devices and at the same time prevents damage to the system in
the event that the batteries are inadvertently connected with the
wrong polarity.
CONTACT INTERFACE
All models are equipped with a contact interface configured in compliance
with the EN 50171 standard.
GENERAL FEATURES
In addition to the features mentioned here, the Riello UPS CSS Sentryum
range has all the features of reliability and flexibility common to the UPS
range it derives from, as well as offering compatibility with the main
options and accessories.
| Models | CSS CBM 6 |
|---|---|
| INPUT | |
| Voltage | 380 / 400 / 415 V three-phase + N - 220 / 230 / 240 V single-phase + N |
| Voltage tolerance | 230 / 400 V ±20% @ full load (for wider tolerance conditions apply) |
| Frequency tolerance | 40 - 72 Hz |
| Power factor | ≥0.99 |
| BY PASS | |
| Rated voltage | 220 / 230 / 240 V single-phase + N |
| Voltage tolerance | From 180 V (adjustable 180-200) to 264 V (adjustable 250-264) |
| Rated frequency | 50 or 60 Hz |
| Frequency tolerance | ±5% (selectable) |
| Number phases | 1 + N |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 6000 VA |
| Active power | 6000 W |
| Power according with EN 50171 | 5000 VA / W |
| Rated voltage | 220 / 230 / 240 V single-phase + N |
| Number phases | 1 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinusoidal |
| Static stability | ±0.5% |
| Dynamic stability | EN 62040-3 class performance 1 non-linear load |
| Frequency | 50 or 60 Hz (ajustable) |
| Voltage distortion with non-linear load | ≤1.5% |
| Voltage distortion with linear load | <1% |
| BATTERIES | |
| Type | VRLA - 10 YEARS expected lifespan |
| Type of charging | One level, Two level, Cyclic recharge (selectable) |
| ENVIRONMENTAL | |
| Color | RAL 7016 Anthracite grey |
| Communication | Status led – Color graphic touch screen display - 2 communication interface slots – USB -RS232 - 4 relay outputs - 5 opto-isolated input |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | Up to 99% |
| Noise (at 1 m) | <40 [dBA ±2] (SMART ACTIVE) |
| Remote signals | voltage free contacts |
| Operating temperature | 0 °C - +40 °C |
| Relative humidity | 5-95% non-condensing |
| Standards | EN 50171 - European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111 |
| DATA | |
| Weight | 102 kg |
| Dimensions (h w d) | 1320x440x840 mm |
